Lenovo IdeaPad 330 Bios And USB Boot – GSM FRP



Today in this video I am going to show you all about the #bios and how to enable #USBboot on #Lenovo IdeaPad 330 step by step.
So let’s Dig in!
=================================
Follow us:https://twitter.com/thepcphone
follow us: https://thepcphone.tumblr.com
follow us: https://www.pinterest.com/thepcphone
like us:https://www.facebook.com/thepcphone/

source

Related Posts

46 thoughts on “Lenovo IdeaPad 330 Bios And USB Boot – GSM FRP”

  2. ELBANANERILLO15

    Guys i have an ideapad 330s and i couldn't install windows 10 for a while, but, the problem was the usb slot i put the bootable usb on, when i connected in the right side's slot i couldn't do anithing, the booot menu said something about a lan usb, then i insert it in left side's slot and worked as the video says, hope it helps you!

    Reply
  4. Paul Marek

    THANK YOU, THANK YOU!!!! I appreciate very much your video on this topic. There are 100's of other videos covering this topic and yours was by far the easiest to follow. The speed at which you cover everything was perfect! all the information needed without dragging on for ever with information that is not needed. I will definitely direct others to your channel if they have any computer issues. Have a great day!

    Reply
  6. Joseph Wefky

    i need to enable the secure boot … the only way to enable it from Bios system by making the boot mode from boot tab is UEFI and if i enabled UEFI hard desk is not written are u able to support please
    lenovo ideapad 320

    Reply
  10. Nina Jesusa Gloria

    Hi I hope you can help me. Your tutorial is by far the best one that i found the only problem is that once it finished installing windows, it says that it needs to restart and then once it opens agai. it goes back to the initial setup where i have to choose language again, and then install windows again. over and over again 😢😢😢 i hope you can help me..

    Reply
  13. Ozair Siddiqui

    Just installed windows 10 onto new HDD using bootable USB pendrive.

    Now that its installed, do i have to go and reset the bios settings to its original ones??

    (For eg, to allow installation using bootable drive, i'd disabled secure boot + changed UEFImode to legacy mode). Do i have to change these back?

    Reply
  19. BIG WILL

    Hello, Thank you in advance.
    Everything was as you showed but my UEFI does not give me the option to change the settings it’s BLACK lettering not in WHITE how can i change that if possible so that i can change the settings ?

    Reply
  32. Alan Volkmer

    My Ideapad is the 330-15IKB. I will try this method because I couldn´t install Win10 from pendrive (USB). I tried to find at BIOS how to boot from pendrive but I didn´t find it.

    Reply

Leave a Comment

Your email address will not be published.

Scroll to Top