Acer Nitro 5 2020 AN515-54 How to Enter the Bios – GSM FRP

This video is a short one just to show you how to enter the bios/uefi on a Acer Nitro 5 2020 Model Number AN515-54


Tools that i use frequently that are Ali-express Affiliate linked

CPB Heat pad:
This is the Blue Pad i always have on my videos usually set at 60 Oc
I use this to soften adhesive on mobile devices.

B7000 Frame Adhesvie:
my go to glue for almost everything now days!

Thin Metal Pry Tool:
Used to open ipad and remove glued back covers on phones

Heat Resistant Tape:
When using the heat gun near sensitive parts, its best to cover them
With this to protect them

Double Sided Black Tape:
The usual tape i use on most repairs, on screens

Red Clear Tape:
For things that need more Stick!,usually on tablet digitizers

Phone Repair Tool Kit:
A Similar tool kit to mine, that i use for those random screws that you dont normally see

Hakko FX 951 Clone Station:
My Soldering Station i use, so far it has been good

Quick 861DW Hot Air Station:
This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase

Power Z USB Amp Tester:
Advanced readouts of power draw on devices

Basic USB Amp Tester:
A Simple Amp tester to see if your charger is actually putting out power

Black Tweezers Set:
The Black Tweezers i use in my videos

Large Metal Pry Tool:
This is the same as the metal pry tool i use, different brand printed on it

Pry Tool:
A New Version of the pry tools

Basic Digital Microscope:
This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed

Orico 120w 10 Port Charging Station:
The Charging station i use out the back, usually having multiple devices connected
Doesn’t support Fast charging but still does a good job

One page i go to when I’m curious what new repair tools are out is:
Wozniak Store:


27 thoughts on “Acer Nitro 5 2020 AN515-54 How to Enter the Bios – GSM FRP”

  1. Hello, Can you please try to help me with this Little problem?
    I5 10300h
    8 GB 3200mhz (processor max 2933mhz)
    So It show 8gb at 2933mhz
    I buyed a new module 2933mhz and on CPU Z It show It Is 2933mhz
    But when i go check general RAM It Say 16 GB 2667 mhz, how Can i fix this Speed slowdown?

  2. Extension question. How do i get this computer to auto power up when mains power is applied? Nothing obvious in the BIOS, after following these instructions.

  3. hi i have the same laptop i put in a new 1tb pcie m.2 ssd hdd and cloned windows on to it but in the bios it wont let me choose which hdd to boot from because before it was the 256gb drive running windows but i cant change it to run windows from the new 1tb any advice

  4. this laptop is very good because you can control fan speed thermal and its not noisy and not very heating so this laptop is nice choise for value money than msi gf63 or gf65 is bulshittt

Leave a Comment

Your email address will not be published.

Scroll to Top